|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » No heat |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
07-19-2009, 12:56 PM
|
|||
|
|||
No heat
Model Number: NVLR333EVOWW Brand: Hotpoint Age: More than 10 years
Our dryer has no heat. We took the back apart and we found a part that looks burnt. We figured out that it is the safety switch part # AP2042653 but would that cause no heat in the dryer? I don't want to get it if that has nothing to do with no heat.
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
07-21-2009, 11:03 AM
|
|||
|
|||
|
Hi Rosalie
I have not worked on that part on this type of dryer, and GE who makes H otpoint is very close with service data on the machine, so I cannot say for certain that the switch is your problem, but it is highly likely and if it is bad it should be replaced anyway. If you decide to go ahead and replace it let us know if that solves your problem. Good luck!
__________________
-
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Roper (Gas) Dryer heats up then heat goes off (still running, no heat) | jtdesignsca | Dryer Repair | 3 | 01-17-2013 12:06 PM |
| Wall oven will not heat/re-heat properly | dottavio | Oven Repair (including Ranges and Cooktops) | 0 | 01-07-2010 09:47 AM |
| Dryer will not heat. It tumbles and cycles but it will not emit any heat. | agentsmith0505 | Dryer Repair | 0 | 10-14-2009 09:44 AM |
| Normal Heat Empty, Heat Shuts Off Full | BigDaddyG | Dryer Repair | 4 | 08-06-2009 03:17 PM |
| No Heat While Turning, Heat When Stopped thou | msg2008 | Dryer Repair | 1 | 08-07-2008 05:08 AM |
Linear Mode
