Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
JesseJames  
#1 Posted : Tuesday, July 7, 2009 12:39:56 PM(UTC)
Quote
JesseJames

Rank: Member

Groups: Registered
Joined: 7/7/2009(UTC)
Posts: 1

I loaned my brother my Maytag Neptune to use and my existing cord was a 4 wire so I changed out the cord to a 3 wire (not the receptacle but the cord) and it powered up at first but I forgot to ground the block (yes it shocked me) so I grounded the block and now it will not power up at all....no matter how I wire it up.
so I believe that I might have shorted something out for the receptacle and the block is getting 240 juice and my brothers old dryer still works when plugged it.

What could have happened and what part do I need to fix it. (control board??)

JJ
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Tuesday, July 7, 2009 3:48:08 PM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Most probable suspect is the control board AP4044079. Should confirmwith voltage measurements.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.