Dryer Repair

Don Dietiker · #1 (**permalink**) 05-20-2009, 08:10 AM

I got my coils yesterday and today removed the left skirt to expose the old coils. The coils are held in place by a metal clamp that would seem to necessitate removing more than the left side skirt in order to back out the philips screws. Is there a procedure for this operation?"

Solution: I just got enough light and space to discover that the philips looking screws were instead square and my earlier attempts to open them hadn't ruined them. Once I found that out, everything else tumbled into place and the dryer took off as if to make up for all the sleepy days and damp loads it had produced.

Thanks to everyone at Appliance Parts Pros.com

Gene · #2 (**permalink**) 05-20-2009, 01:49 PM

Answered here: Dryer runs no heat, Please help

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washer Leaks during Fill Process	radarraden	Washer Repair	0	02-13-2009 09:56 AM
won't start heat process	fastart	Oven Repair (including Ranges and Cooktops)	4	02-12-2009 05:28 AM
Grinding Sound during Drying Process	G. Davis	Dryer Repair	1	11-29-2007 11:22 AM
problem starting self cleaning process	tsanford	Oven Repair (including Ranges and Cooktops)	0	11-10-2007 09:25 PM

Process/procedure for coil exchange

Dryer Repair

I got my coils yesterday and today removed the left skirt to expose the old coils. The coils are held