Dryer Repair

racefan · #1 (**permalink**) 12-06-2007, 08:12 PM

I've cleaned the duct work and still no heat. The thermal fuse seems to be located in front of the duct...how do you get to it to replace or to put a meter on it. If the heating element needs to be replaced, which panel do you take apart, top, back, they seem to be spot welded... thanks for your help!

racefan · #2 (**permalink**) 12-07-2007, 08:16 AM

please reply as soon as possible

Bigboss88 · #3 (**permalink**) 12-07-2007, 08:40 AM

Go to: http://www3.sears.com/

Input your model number. Then select "DRY/CAB HEATER"

It would appear that you will have to remove the drum to access the element.

I believe that you have a broken element.

Thank You

abbie · #4 (**permalink**) 12-07-2007, 11:55 AM

FIRST check to see if you have the right voltage going to the dryer,There should be 240 volt,s going to the dryer.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heat but not drying, seems like heat is not blowing good	Papa1	Dryer Repair	2	10-07-2007 10:11 AM

no heat!!

Dryer Repair

I've cleaned the duct work and still no heat. The thermal fuse seems to be located in front of