Rank: Member
Groups: Registered
Joined: 8/9/2011(UTC)
Posts: 3
|
After running a load the dryer controls simply did not turn on the next time around . . .
When pressing "Control On" nothing happens, no lights, nothing.
Tried unplugging and plugging in the unit again, checked circuit breakers, but still nothing happens.
Does this sound like a control module replacement or could it be something else?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: rbyeway  After running a load the dryer controls simply did not turn on the next time around . . .
When pressing "Control On" nothing happens, no lights, nothing.
Tried unplugging and plugging in the unit again, checked circuit breakers, but still nothing happens.
Does this sound like a control module replacement or could it be something else? Rbye, It could be an electronic control board. But your first check should be, At the power cord and terminal block, you should check for 240 VAC across the two outside terminals of the terminal block(back of the dryer) with a multi meter. Part number: AP3873826
Then you will want to check for 120 VAC from connector P1 pin 5 (black) to P1 pin 2 (white) to see if you have power to the main control board. Since the unit seems to be "dead". If you have the voltage, then you will need the control board. Part number: AP3775548
Good Luck, :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
