Rank: Member
Groups: Registered
Joined: 3/6/2009(UTC)
Posts: 1
|
The seal in the front and back of the drum is not flush with the drum. There are gaps and it seems that clothing catches in the gap and becomes discolored. It would seem that both seals should be replaced. What does the task entail and approximate repair time?
Thanks.
Gary
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
Here are your parts Model LDG9801AAWHere is a service manual http://www.servicematters.com/m...ibrary/docs/16008714.pdfCannot say how long it will take depends how handy you are also it is better to take your time and do it right. Give yourself at least an afternoon. Make yourself diagrams etc. of anything that you may forget how it goes back together. A digital camera comes in handy for this. Open it up and beside the seals also check the belt, rear suspension rollers, idler wheel, front glides etc. for wear and bearing slop. Might as well do an overhaul while you have it open. Give the interior a good clean. Clean and check the blower wheel. Also clean and check your vent system. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
