[soupy]

I replaced the element and high end limit switch. When I started the dryer up it will heat for about 5 seconds, and off goes the limit, when it cools down try again with same results.

Thanks

Soupy

[Drags1998]

Check the EXHAUST coming out of the dryer, Does it blow strong? if not, check the BLOWER WHEEL!!!!

[soupy]

I have had it totally apart and cleaned out all lint and what ever and yes it blows strong

Thanks

[Drags1998]

Are you checking this with the door open? The door must be closed for the heat to cycle correctly!!!

[soupy]

So what you're telling me is, that the element cycles during the drying time. I thought that the element would stay on for a longer time during drying. So at that rate it seems to be working fine as there is plenty of heat and air coming out the discharge.

Thanks

Soupy

[Drags1998]

The door needs to be closed so that the airflow across the heater and the high limit thermostat keeps the high limit from opening. It sounds like your all set!!!