|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » operating thermostat bias heater question |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
02-03-2009, 01:55 PM
|
|||
|
|||
operating thermostat bias heater question
Model Number: wplgr5620kq1 Brand: Whirlpool Age: More than 10 years
Hello to all,
I have a gas dryer, runs fine in timed mode, but timer fails to advance in auto. I looked at print, it appears the TW to WB or TM to OR id the selector part of the switch for timed or auto, and the TM to WB is the timed one. Am I right? dryer runs if motor runs basically? I want to undesrstand how and what does the bias heater do. I assumed my problem was a bad operating t stat and replavced it. No change. Then I Ohm checked old to new. Old was about 7600 ohms, new is 75 ohms! Print calls for 5600 to 8400 ohms. Is my new one defective? should I have contunity at all times between TM and OR when in auto? Thank you Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dryer Operating Thermostat Testing | FeralReason | Dryer Repair | 3 | 01-09-2010 09:57 PM |
| Operating without a Defrost Thermostat | DavidY | Refrigerator & Freezer Repair | 1 | 07-31-2009 04:05 PM |
| Thermostat Question | jashan | Refrigerator & Freezer Repair | 6 | 06-27-2009 09:25 AM |
| Thermostat question | profileowner | Dryer Repair | 3 | 02-25-2009 02:57 PM |
| bought new thermostat and heater thermostat and now won't heat at all | mgilbert6 | Dryer Repair | 0 | 09-07-2008 09:58 AM |
Linear Mode
