[tracyb]

I have replaced the heating element. Now I cannot get belt to tighten back around drum. The assembly arm with a roller has a spring. but there are three holes the spring could go into. I have tried all three. The arm is set suggly under the motor. Everything feels tight. I get the drum on, belt on. I spring the drum and the belt comes back off

I looked for a diagram that would show how to re-assemble, but I do not find one. Your customer service desk said to come here for answer. Dryer is apart right now. Or should I call?

[sidfink43]

Take a look at the diagrams in the post at the top of this page and you will find one for Maytag.

Also, here is another set, see diagram F for Magic Chef

http://www.************************....grams#DiagramF

Hope this helps.

[tracyb]

But your link did not go through.

it doesn't matter now, I broke the little spinley rod coming from the motor that is suppose to help hold the assembly arm for the tensioner. I am not going to take the motor apart to change it.....

Thank you for your assistance

[sidfink43]

Well sorry about that, hope things work out better in the future.