|
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » GE dryer wont heat |
|
|
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Model Number: ddg7289rclww Brand: GE Age: 5 - 10 years
the glow ignitor heats intermittently. Tested with multi meter and got 81.5 ohms.
Also tested solenoids - I got 1205 ohms on the 2- prong coil. the three prong coil gave me 549 for the left and right prongs; middle and right gave me 1900; middle prong and left prong gave me 1352ohms. these were unplugged. I removed and tested the flame sensor on the burner housing and got 00.7 ohms. anyone have ideas. so far nothing seems to have solved the problem. Related Models |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
|
||||
|
The igniter is operated by the thermostat and normally should cycle "on" and "off" depends on the temperature. Is that what you meant saying: "the glow igniter heats intermittently"?
If it stays "on" not long enough to maintain a proper temperature then there is a lack of air flow through the dryer due to clogged vents outside the dryer as well as inside. Gene.
__________________
Professional appliance repair in Orange County, California. |
|
See inside of your appliance - diagrams and part photos for virtually every model. powered by AppliancePartsPros.com |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dryer still wont heat | jfull1965 | Dryer Repair | 4 | 10-23-2008 05:11 AM |
| Dryer wont heat up | TPost | Dryer Repair | 1 | 10-22-2008 11:43 AM |
| Timer wont advance and dryer wont heat | awatt26 | Dryer Repair | 2 | 06-20-2008 10:43 PM |
| Dryer wont heat | TomK | Dryer Repair | 0 | 10-28-2007 12:47 AM |
| dryer wont heat | tom46151 | Dryer Repair | 1 | 09-10-2007 06:56 AM |