Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
johnthehandyman  
#1 Posted : Tuesday, September 16, 2008 1:21:23 PM(UTC)
Quote
johnthehandyman

Rank: Member

Groups: Registered
Joined: 9/16/2008(UTC)
Posts: 1

i was drying my clothes and loading the washer when i noticed the dryer had stopped mid cycle...I have replaced all thermostats and the thermal fuse about 80.00 dollars so far.I inspected the heating element wich looks good...were should I go from here.I have less than 24 hrs before g-friend makes me spend 300.00-400.00 for a new one....never been beat...YET

Johnthehandyman
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Tuesday, September 16, 2008 2:01:48 PM(UTC)
Quote
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

john,
I have a silly question......Did you check the outlet to make sure you had 220V(+/- 10% variance) or the breaker to see if it had partially tripped?
Nat
ApplianceJunk  
#3 Posted : Tuesday, September 16, 2008 3:48:04 PM(UTC)
Quote
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

Also don't forget about the door switch.
SublimeMasterJW  
#4 Posted : Tuesday, September 16, 2008 4:26:13 PM(UTC)
Quote
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
Take the filter's housing off and get that crap out of the blower housing. get the filter housing clean. Make sure the air flow is there.That skinny white fuse is tied into the door switch. It detects excessive heat in the blower housing. It is probably blown due to excessive lint buildup inside that filter housing. Replace that fuse and clean that filter housing.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
dryer just stopped running and will not start (Dryer Repair)
by cbailey 2/18/2009 4:00:13 PM(UTC)
dryer just stopped running and will not start (Dryer Repair)
by cbailey 2/18/2009 3:58:24 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.