Dryer Repair

Ward05 · #1 (**permalink**) 08-22-2010, 06:35 PM

The moisture assembly (AP2107715) came off of the door assembly. the assembly holds the lint filter. when this shappened the two red wires came off. the assembly has what looks like two chrome bars with spade connectors on each end. How do I determine which spade to put the connectors on??? I have two wires and four possible places to put them.

thank you
Ward

denman · #2 (**permalink**) 08-24-2010, 08:18 AM

Here is the wiring diagram
http://manuals.frigidaire.com/prodin...134064800e.pdf

It does not matter which end of the strips the wires attach to as long as you have one wire going to each strip.

The way it works is that the board monitors the resistance between the strips.
When totally dry the resistance is infinite (open). When there is moisture between the strips there is a resistance, the board senses this and continues drying the clothes.

Ward05 · #3 (**permalink**) 08-24-2010, 08:50 AM

Great, thanks for the help and the theory behind it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cannot find the moisture sensor	christian1959	Dryer Repair	2	04-01-2010 02:38 PM
moisture sensor	Rick Riebesel	Dryer Repair	1	02-16-2010 10:14 AM
Automatic moisture sensor	eceaster	Dryer Repair	3	01-12-2010 08:43 AM
Where is the moisture sensor for auto-dry?	RisBMW	Dryer Repair	0	03-06-2009 06:35 PM
Where is moisture sensor?	brian44	Dishwasher Repair	1	12-13-2007 04:59 PM

moisture sensor

Dryer Repair

The moisture assembly (AP2107715) came off of the door assembly. the assembly holds the lint filter. when this shappened the