Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
fredella  
#1 Posted : Wednesday, August 18, 2010 9:28:57 AM(UTC)
Quote
fredella

Rank: Member

Groups: Registered
Joined: 8/18/2010(UTC)
Posts: 2

I've checked all of the sensors and all are closed, the flame will come on for only about 30 sec. shuts off and will not come back on. The igniter comes on about every 45 to 60 sec. but there is no flame, I'm not sure but could be the timer? Fred
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, August 19, 2010 10:48:54 AM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Fred,

Most likely the problem is a bad gas valve coils. You also may want to clean the dryer exhaust lane all the way through the vent outlet.

- The coil kit Part number: AP3094251
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
No cold water after relacing drain pump...fred2222 (Washer Repair)
by fred2222 3/31/2014 4:51:43 PM(UTC)
Fred (Refrigerator & Freezer Repair)
by fburgard 11/12/2013 1:49:43 PM(UTC)
Fred (Refrigerator & Freezer Repair)
by wftw4haiti 3/27/2012 8:40:20 AM(UTC)
Fred (Dryer Repair)
by fredella4@verizon.net 1/22/2011 3:20:37 PM(UTC)
Fred (Dryer Repair)
by fredella 8/19/2010 7:05:47 AM(UTC)
Fred (Oven Repair (including Ranges and Cooktops))
by frednk 12/8/2009 1:05:17 PM(UTC)
Freezer ok but not too cold, Fredge warm (Refrigerator & Freezer Repair)
by skopedia 7/13/2009 1:36:13 PM(UTC)
Fred Maringer (Oven Repair (including Ranges and Cooktops))
by Fred Maringer 3/1/2009 9:59:46 AM(UTC)
Fred (Dishwasher Repair)
by wilkerson 11/19/2007 12:35:37 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.