Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
roushfan123  
#1 Posted : Friday, June 18, 2010 5:05:19 AM(UTC)
Quote
roushfan123

Rank: Member

Groups: Registered
Joined: 6/18/2010(UTC)
Posts: 2

My dryer will not start. I have good power, ran the system check diagnostics listed in the service manual. The only one that didn't pass was "cycles the motor on/off." So, I ordered a new motor -- no help. Same symptoms. Just before it quit, my wife said she saw "hE" in the display. Does this mean the thermistor is open? If so, can I confirm that by taping the connectors together? I've tried that and it still won't start. When I push the rotary selector dial to start it, I hear a faint click from the control board, then another faint click a second or 2 later. Also, I have 120v out of the motor relay but not past the TH1 thermostat. Any help would relieve an EXTREME amount of stress on my marriage! UserPostedImage
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, June 18, 2010 7:16:14 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I am assuming that you have the tech sheet.

[COLOR="Blue"]Also, I have 120v out of the motor relay but not past the TH1 thermostat.[/COLOR]
If you are measuring from Neutral to 1 BRN at the control board or one side of TH1 then I would say either the thermostat or the belt switch is open.
THIS FORUM IS DEAD!!!!!!!
roushfan123  
#3 Posted : Friday, June 18, 2010 7:41:27 AM(UTC)
Quote
roushfan123

Rank: Member

Groups: Registered
Joined: 6/18/2010(UTC)
Posts: 2

Originally Posted by: denman Go to Quoted Post
I am assuming that you have the tech sheet.

Yes I do. Thanks for the quick reply. The belt switch is good. I'll be replacing the TH1 today. Thanks again.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Amana won't start (Dishwasher Repair)
by shellygriffin 10/9/2011 7:17:12 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.