Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Whirlpool dishwasher - no power
Options
Go to last post Go to first unread
Model: GU2475XTVB0 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
sd411  
#1 Posted : Wednesday, May 5, 2010 9:02:17 AM(UTC)
Quote
sd411

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 4
My dishwasher just stopped working last night (looks like it died during a rinse cycle). I vacuumed all the water out of the bottom and did not find anything clogging the drain.

Everything seems to be dead, nothing lights up on the control panel (top of the door).

I've checked power to the switch and checked the breaker. Everything up to the dishwasher is okay.

Can anyone give me some guidance on what to check next? I can't seem to find a schematic or a manual on line.

Thanks!

SD
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
magician59  
#2 Posted : Wednesday, May 5, 2010 10:58:02 AM(UTC)
Quote
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
If you're getting power to the dishwasher, the next thing to check would be the door switch. Make sure it actually latches, and check it for continuity.
Back to top
sd411  
#3 Posted : Wednesday, May 5, 2010 1:20:45 PM(UTC)
Quote
sd411

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 4
Originally Posted by: magician59 Go to Quoted Post
If you're getting power to the dishwasher, the next thing to check would be the door switch. Make sure it actually latches, and check it for continuity.



Will do. Thanks.
Back to top
sd411  
#4 Posted : Wednesday, May 5, 2010 3:54:29 PM(UTC)
Quote
sd411

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 4
Done. The door latches securely and the switches show continuity. It has no lights on the console (typically there is one green light) but the control board has power going to it (115V).
Could this be the problem?

What do you recommend next?

Thanks!

SD
Back to top
sd411  
#5 Posted : Saturday, May 8, 2010 9:38:53 AM(UTC)
Quote
sd411

Rank: Member

Groups: Registered
Joined: 5/5/2010(UTC)
Posts: 4
I've checked the door switches and have power to the control panel but no lights on the console or functions working. Can anyone provide me with some other areas to check?

Thanks.

SD
Back to top
denman  
#6 Posted : Sunday, May 9, 2010 5:22:04 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find a parts breakdown for this unit but here is the tech sheet
http://www.servicematters.com/docs/wiring/TechSheets_11_17_09/Tech%20Sheet%20-%20W10142800.pdf

Have you checked the bi-metal (thermal fuse).
Here is a parts breakdown for a GU2455XTST2 see Item 6 in Section 2. Yours may be similar.
Replacement parts for WHIRLPOOL GU2455XTST3 Undercounter Dishwasher | AppliancePartsPros.com

On some units the replacement comes with a small wiring harness which also must be replaced.

If you have power from P4 and P2 Neutral (depends on type of tub type) to P8 and P6 then odds are your control board is shot.
THIS FORUM IS DEAD!!!!!!!
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET