Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
nicknaso  
#1 Posted : Wednesday, April 21, 2010 6:42:49 AM(UTC)
Quote
nicknaso

Rank: Member

Groups: Registered
Joined: 4/21/2010(UTC)
Posts: 4

The light on the wash cycle (Baked on Cookware), and in the Options menu the Hi Temp, Sani Rinse lights are constantly on. The keypad is stuck in these settings, and wont allow any other selection. The machine will go through a complete cycle in these settings, but takes approx. 4-hrs. Even after hitting the cancel button and then start button, it reverts to these settings, and no other setting is possible using the keypad, any suggestions would be appreciated. Nick
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
magician59  
#2 Posted : Wednesday, April 21, 2010 7:32:35 AM(UTC)
Quote
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273

Do you get an audible response when you press the touch pad selections?
nicknaso  
#3 Posted : Wednesday, April 21, 2010 7:42:01 AM(UTC)
Quote
nicknaso

Rank: Member

Groups: Registered
Joined: 4/21/2010(UTC)
Posts: 4

Originally Posted by: magician59 Go to Quoted Post
Do you get an audible response when you press the touch pad selections?


No audible, or response from touch pad.
nicknaso  
#4 Posted : Wednesday, April 21, 2010 1:26:48 PM(UTC)
Quote
nicknaso

Rank: Member

Groups: Registered
Joined: 4/21/2010(UTC)
Posts: 4

No Audible.
magician59  
#5 Posted : Wednesday, April 21, 2010 1:48:41 PM(UTC)
Quote
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273

I would suspect either a bad touch pad, or a bad control board.
nicknaso  
#6 Posted : Wednesday, April 21, 2010 2:36:28 PM(UTC)
Quote
nicknaso

Rank: Member

Groups: Registered
Joined: 4/21/2010(UTC)
Posts: 4

Thanks, I have a control board on the way, I will keep you posted.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
oven cycle light comes on and goes off when oven is not on (Oven Repair (including Ranges and Cooktops))
by Guest 3/19/2024 7:45:28 AM(UTC)
Opened lid to add something to washer after it started and now the cycle won’t start again (Washer Repair)
by Guest 2/25/2024 6:18:56 AM(UTC)
Dishwasher fills and drains only. Does not go through the wash and rinse cycle (Dishwasher Repair)
by Guest 2/11/2024 6:26:48 AM(UTC)
Maytag MVW7232HW0 Will Not Complete a Cycle (Washer Repair)
by JNN1988 2/7/2024 8:29:57 AM(UTC)
Maytag Washer Doesn't Complete Spin Cycle (Washer Repair)
by glmoore0001 2/5/2024 6:32:24 AM(UTC)
Kitchenaid quits mid cycle, goes to cancel/drain (Dishwasher Repair)
by T_mich 2/4/2024 11:11:49 AM(UTC)
GE GTW465ASN1WW cycles fill-drain, repeat (Washer Repair)
by DoodahDenn 1/31/2024 12:19:12 PM(UTC)
Maytag MDB4949SHZ1 will not complete cycle (Dishwasher Repair)
by Bojacked 1/3/2024 2:12:38 PM(UTC)
GE WBSR3140DAWW Does not spin during rinse/spin cycle (Washer Repair)
by nj_999 12/23/2023 3:31:43 PM(UTC)
LG front load knocking during cycle (Washer Repair)
by Guest 11/23/2023 1:51:40 PM(UTC)
Maytag Washer Excess Suds during "clean washer" cycle (Washer Repair)
by DogHair 11/14/2023 2:04:58 PM(UTC)
Whirlpool WTW5700SW0 Washer -- Clothes Wet After Cycle Completes (Washer Repair)
by npolite 11/9/2023 1:24:23 PM(UTC)
HELP - Washer randomly pauses during cycle (Washer Repair)
by Guest 11/9/2023 11:06:57 AM(UTC)
LG dishwasher loud clicking noise after cycle completes (Dishwasher Repair)
by Guest 10/29/2023 6:43:16 AM(UTC)
Whirlpool washer spin cycle towels only problem (Washer Repair)
by kylo67 10/1/2023 5:54:44 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.