[johnharrell]

I have a Frigidaire dishwasher that's been working fine for a few years. I think it's about 5 years old at this point. Tried to use it today, and it looks like it's not getting power. Checked the breaker, don't see any loose wires, etc.

Is there a reset switch somewhere, or an internal breaker?

Any help is appreciated...

[misterfixall]

remove bottom cover, there is a square aluminum box ,remove cover, the power wires are there, there should be two marrete conectors, carefully remove them, check for burnt wire, if you have a multimeter, check to see if you have 110 volts across these 2 wires, be careful these wires will be alive if breaker is good, if there is voltage the problem could be door switch in control panel.

[johnharrell]

Thanks, I'll check it out...