Dishwasher Repair

dudedudeness · #1 (**permalink**) 08-27-2007, 06:11 PM

Removed pump and motor housing, working on removing the motor to get to the seals etc; behind the impeller , motor feels pretty locked on, already removed the disk mount and now working on getting the motor broke free. thanks,

Admin / APP Team · #2 (**permalink**) 08-28-2007, 10:33 AM

You're planning on replacing the impeller/seal kit anyway, right? Break the old seal then.

- Diagrams for Model DU840CWDB5

Break #8 and remove #12 screws.

Let me know...

dudedudeness · #3 (**permalink**) 08-29-2007, 07:55 AM

Found out just how rusted on some of those parts can wind up being after years of service, no wonder it appears most people just wind up changing the whole fricken housing ! thanks though....

Admin / APP Team · #4 (**permalink**) 08-29-2007, 03:30 PM

Yeah, I never did like rebuilding dishwasher pumps. On this design people usually end up breaking the disc mount while trying to loosen it up, but sounds like you did good. Almost done.

ldorie · #5 (**permalink**) 05-17-2008, 02:48 PM

I purchased a 8535760 pump motor assembly -- how do I remove the old motor. It looks like it just twists off but it is on very tight. What is the recommended way to get the old motor off?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can I seperate the motor from the pump?	Sandman	Washer Repair	3	08-29-2007 09:41 AM
Cabinet removal	jumbyway	Washer Repair	1	08-23-2007 12:07 PM
pump and motor noise	Mike G. Siano	Washer Repair	0	08-17-2007 10:04 AM
Transmission Removal	Street777	Washer Repair	0	08-01-2007 05:57 PM
Main pump motor is not activated.	gebman1	Dishwasher Repair	0	07-31-2007 11:05 PM

Pump/ Motor removal

Dishwasher Repair

Removed pump and motor housing, working on removing the motor to get to the seals etc; behind the impeller , motor