Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
squier3  
#1 Posted : Friday, January 29, 2010 4:00:29 PM(UTC)
Quote
squier3

Rank: Member

Groups: Registered
Joined: 11/15/2009(UTC)
Posts: 43

I have a Maytag dishwasher thats only a couple weeks old and now it won't do anything. I get power all the way up to the bi-metal and nothing beyond that. I did a continuity check and its open. I'm assuming its not resetable. I was just wondering what would have caused this and how to prevent it from becoming a reoccuring problem
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Saturday, January 30, 2010 2:10:18 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find any info on this unit, it is probably too new.

Does sound like the bi-metal is shot.

I would get it repaired under warranty.
It is a thermal fuse but can also blow due to current.
You may have something else that is expensive to replace blowing the fuse.
THIS FORUM IS DEAD!!!!!!!
squier3  
#3 Posted : Saturday, January 30, 2010 5:05:03 AM(UTC)
Quote
squier3

Rank: Member

Groups: Registered
Joined: 11/15/2009(UTC)
Posts: 43

would the fact that the garbage disposal is on the same cuircuit as the dishwasher, and is junctioned in the dishwasher box its self have anything to do with this fuse blowing so soon after installation?
denman  
#4 Posted : Saturday, January 30, 2010 5:42:25 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes it could if they were run at the same time.

They may have lowered the voltage which then would cause them to pull more current.
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Samsung Refrigerator RS2555SL - freezer drain heater impedance - bimetal operation opposite normal - (Refrigerator & Freezer Repair)
by Badbrad1 7/15/2021 5:10:16 PM(UTC)
Defrost Bimetal (Refrigerator & Freezer Repair)
by squier3 1/29/2010 2:06:18 PM(UTC)
Detergent Cup Not Opening (bimetal) (Dishwasher Repair)
by WIFEISKILLINGME 10/5/2009 9:50:53 AM(UTC)
Replaced adaptive defrost and bimetal no success (Refrigerator & Freezer Repair)
by Huangt 11/23/2008 3:32:11 AM(UTC)
bimetal fuse (Dishwasher Repair)
by garyt 11/12/2008 7:18:25 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.