[Geokav]

Thank you for the input. I accepted defeat and have an appt with a service tech. This one's going to the professionals; not being a Dr. I have no' patience' for this!

[tsonkovski]

it says to me the file was damaged please email me a copy ninjatune@mail.bg

and if anyone has any info on skt5102eu PLEASEE feed

[Admin / APP Team]

tsonkovski, there is nothing wrong with that PDF file. Must be your acrobat reader or something on your end.

[tomjava]

Originally Posted by chriscw

Web search found this:

http://www.cteq.ca/Doc_texte/Dishwas...ng%20bosch.pdf

Thank you very much,

[hemagugaraj]

As suggested in the forums, I removed and examined the control unit. All the solderings look good.
Now what should I do?
Please provide your suggestions.

[Gene]

Even if you did not find anything wrong visually, there is still very high chance for the control module to be the culprit in such situation.

- The control module Part number: AP2802870

Gene.

[hayseydi@comcast.net]

Well, I need repair help for a Bosch SHU33A06UC/40
It keeps leaking from the Water Valve. (at least that where it looks like it's leaking from) We replaced it in March, 2010, when putting down a new floor. Now, we have water under that floor and when looking again, it appears as if it;s leaking in the same place. Is this possible?

[hayseydi@comcast.net]

Thanks, But We've Replaced The Water Pump And All Is Well. This Is, However, The 2nd One We've Replaced In 1 & 1/2 Years And The Unit Is Only 5 Years Old. It Had Better Be The Last.
Thanks For The Input.

[hayseydi@comcast.net]

Well, It's A Little Late In Coming. We Fixed The Dishwasher 2 Weeks Ago By Replacing The Water Pump. But, I Did Use Some Of The Info Found On Your Website, So Thanks For That.

[monthoj]

Originally Posted by Gene

Even if you did not find anything wrong visually, there is still very high chance for the control module to be the culprit in such situation.

- The control module Part number: AP2802870

Gene.

Gene, I have a SHX46A with the controls "under the counter" ie on top edge of door. Control Unit is AP3194844. Does this control panel series suffer the same relay solder burn problem of the SHU units that are most prevalent in this discussion?

Thanks