[kctay]

Hello,

My problem with my Maytag quiet series 300 is that you can hit start, you can then hear the water going into the machine, but the rest of the cycle never starts. My latch was broken, and after reading some posts here, I thought replacement of that assembly might fix it. Well, just put the latch in today, and same problems.

After trying to run a cycle the bottom filled with water, but then it sits there for about 2-4 minutes, then shuts itself off. I can than hit the start button again, it puts 2 minutes on the time window, and proceeds to drain the dishwasher of water.

I'm about ready to chuck this thing since it doesn't really wash that well, and is over 5 years old. Any cheap easy ideas? If not, any recomendations for a new dishwasher in the $350 - $450 range?

Thanks

[kctay]

Uh thanks for nothing, I'm not in LA, I'm in Oregon

[denman]

I cannot find any info on the given Model Number, please check it.
I tried here, a tech site and the Maytag site with no luck.

[kctay]

Sorry, I read off the model wrong, the third letter is a B, not an 8, so the model number is: MDB8600AWB, the Maytag Quiet Series 300.

[denman]

Here are the parts
Replacement parts for MAYTAG MDB8600AWB Dishwasher - Undercounter | AppliancePartsPros.com

Here is a tech sheet
http://www.servicematters.com/maytag...s/16026390.pdf

And a manual
http://www.servicematters.com/maytag...s/16021814.pdf

And a troubleshooting flow chart
http://www.servicematters.com/maytag...TDD-0008-S.pdf


Try running the diagnostics.

[Skynard]

Did you ever find a solution?