Dishwasher Repair

afpd604 · #1 (**permalink**) 11-21-2009, 09:25 AM

Frigidaire Dishwasher FDBB4365FS3, All lights flashing and an ER message on screen. I went through the service test sequence and it told me that the rinse aid was bad. Replaced rinse aid. Worked in service test until filled then got error and flashing again. Replaced control board and rinse aid again. Same result as above...AGAIN! Thinking of replacing console panel now and rinsed again. Lucky parts have lifetime guarantee!! Will this solve my problem? I was also wondering if wires to rinse aid level switch are reversed. Which color should be towards me with the door closed and the front panel off? Thank You

afpd604 · #2 (**permalink**) 11-22-2009, 12:18 PM

Replaced control console and rinse aid this solved all my problems. Console part came with a error code tip sheet. Please see my other post(s) that have it attached...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frustrated- Won't finish cycle	Jack-99	Washer Repair	2	10-19-2009 10:41 AM
Frustrated	pete breeden	Dishwasher Repair	1	10-04-2009 12:32 PM
Frustrated!	boxermama	Washer Repair	2	02-13-2009 09:50 AM
Frigidaire Dishwasher Won't Dry	edv822	Dishwasher Repair	1	11-23-2008 08:33 AM

Frustrated with Frigidaire Dishwasher

Dishwasher Repair

Frigidaire Dishwasher FDBB4365FS3, All lights flashing and an ER message on screen. I went through the service test sequence and