Dishwasher Repair

covehome · #1 (**permalink**) 11-12-2009, 07:27 AM

The light for the door lock is the only thing that lights up on the control panel. When pushing any option buttons, it flashes, but the option and the cycle buttons do not light up, change or start. All the connections are intact with no sign of damage. Any suggestions on which part to replace? Thanks.

denman · #2 (**permalink**) 11-12-2009, 08:39 AM

Your model number is missing the last digit.
Also I think it is KUDI01ILB?
Note the use of 1, I and L the people at Kitchen Aide seem to enjoy confusing everybody.

Here is a tech sheet. It is for a KUDI01ILB0 so am not sure if it will match your unit
http://www.servicematters.com/docs/w...%208530866.pdf

If by door lock you mean control lock then perhaps it just needs resetting.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Control Panel or Electronic Control - which causes blinking panel lights?	MarcLCH	Dishwasher Repair	1	02-25-2010 03:25 AM
GE Built-In Oven Control Panel - replace entire assembly or just control kit	boschuser	Oven Repair (including Ranges and Cooktops)	1	01-05-2010 03:11 AM
tranformer blew on control panel need specs for new transformer not control panel	kaydog2009	Oven Repair (including Ranges and Cooktops)	0	05-11-2009 07:22 AM
Replace control panel or just control panel housing?	Max Strano	Dishwasher Repair	1	08-26-2008 06:02 PM
Control Panel	gebhardtwf	Dryer Repair	1	03-05-2008 05:25 PM

Control panel?

Dishwasher Repair

The light for the door lock is the only thing that lights up on the control panel. When pushing any