Dishwasher Repair

Pirate6381 · #1 (**permalink**) 11-07-2009, 06:27 PM

Hope someone can help with this.

Kitchen Aid KUDR24SEWH2 - stopped in mid cycle. Dishes were clean, but wet when door opened several hours later. Standing water in bottom.

No lights or functions when I tried to start it again.

Thought maybe switch panel membrane or control board ?

denman · #2 (**permalink**) 11-08-2009, 05:19 AM

Here are your parts
Replacement parts for WHIRLPOOL KUDR24SEWH2 | AppliancePartsPros.com

Here is the tech sheet
http://www.servicematters.com/docs/w...%209743409.pdf

Could be a number of things but the Thermal Fuse would be at the top of the list. See Item 22 in Section 2. Be sure to use the new harness if this is the problem.
Check it with a meter.
I would also check that the vent actuator and the dispenser are not shorted before replacing the fuse.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kitchen Aid Control Panel replacement	ndb8fxe	Oven Repair (including Ranges and Cooktops)	4	03-07-2009 06:10 AM
Control panel assembly membrane cover?	Artana	Oven Repair (including Ranges and Cooktops)	0	03-02-2009 09:27 AM
Control Panel On Kitchen Aid Oven	joncher	Oven Repair (including Ranges and Cooktops)	1	01-21-2009 07:46 AM
Kitchen Aid Control Board Replacement Help	tjgx100	Microwave Repair	2	12-08-2008 02:21 PM
control panel or board????	junebugtraveler	Dishwasher Repair	2	08-28-2008 05:12 PM

Kitchen Aid:Switch Panel Membrane or Control Board?

Dishwasher Repair

Hope someone can help with this. Kitchen Aid KUDR24SEWH2 - stopped in mid cycle. Dishes were clean, but wet when door