Discuss

LID Switch Error : GE Profile

 in

Dishwasher Repair

. "

The top load washer will not agitate or spin. The motor is showing a Lid Switch error code. In Field

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Dishwasher Repair » LID Switch Error : GE Profile

  By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 08-06-2018, 12:50 AM
Junior Member
 
Join Date: Aug 2018
Posts: 1
karthickjagan is on a distinguished road
Smile LID Switch Error : GE Profile
Brand: GE   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


The top load washer will not agitate or spin. The motor is showing a Lid Switch error code. In Field Service Mode there were no error codes, not even for the lid switch.

GE Profile Model Number: PTWN6250M0WT and Control Board number: 175D2750G377

I took out the Lid Switch and checked it with my digital ohm meter. With the magnet, the resistance was fluctuating but it hit zero and beeper a few times.

Is that a sign of a bad switch?

When I checked it at the Control Board I got 13vdc between the Blue and Red wire and a pulsing .65 to .75vdc between the Red and Yellow wire. Is this good?

I disconnected the communication harness at the Motor and checked the Motor harness connector for the same voltages found at the Control Board. I got 13vdc between the Blue and Red wire and a pulsing .65 to .75vdc between the Red and Yellow wire. Same as the control board. Is this good?


No Field Service error codes. The motor had normal red flash 1sec on/off most of the times. Sometimes when disconnecting thins, I have seen the motor blinked 10 times and pause.

Thanks for taking the time to help me figure this out. I really appreciate this.

- KJ

See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
GE Profile Range: Need wiring help for Infinite switch t53864 Oven Repair (including Ranges and Cooktops) 0 08-29-2016 02:40 PM
GE Profile ignitor switch harness slanger1 Oven Repair (including Ranges and Cooktops) 0 02-23-2011 07:44 AM
GE Profile Refrigerator light switch Jon V Refrigerator & Freezer Repair 3 10-01-2009 07:38 PM
GE Profile Refrigerator light switch Jon V Refrigerator & Freezer Repair 0 09-30-2009 08:59 AM
GE Profile Refrigerator light switch Jon V Refrigerator & Freezer Repair 0 09-29-2009 12:46 PM



All times are GMT -7. The time now is 10:04 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17