Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
drewster  
#1 Posted : Tuesday, November 1, 2016 4:26:55 PM(UTC)
Quote
drewster

Rank: Member

Groups: Registered
Joined: 11/1/2016(UTC)
Posts: 3

Greetings,

Thanks in advance for any help to pin point my exact problem. My dishwasher cycle begins and it starts filling up with water. After 20-40 secs it tries to cycle to the next step and can't. you can hear a pump or something water to engage but it cant. Spry arm are not clogged. It gets water, it fills up an it will go though the cycles in time. Water pumps out. Not sure whats needs to be replaced. I replaced the water pump about to years ago water wouldn't drain. Now this. Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Wednesday, November 2, 2016 10:53:11 AM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Your model no. is missing the last 5 digits.

If the main pump motor is not running it could be a number of things.

Ranging from something stuck in the impeller, bad motor, bad wiring, or bad control board.

Whirlpool W10168823 PUMP&MOTOR - AppliancePartsPros.com
drewster  
#3 Posted : Wednesday, November 2, 2016 6:07:56 PM(UTC)
Quote
drewster

Rank: Member

Groups: Registered
Joined: 11/1/2016(UTC)
Posts: 3

665.13123k702

Yeah sounds like the motor wants to engage but can't. I want to say I have heard the motor sounding a little off leading up to this point. After doing some research and watching some video's I see that the circulator pump and motor are all in one. I am thinking about replacing it. I will check it first with a volt meter. As for my board, well you never know but I haven't seen any AOC's with the lights. Everything looks good. Thoughts ?
drewster  
#4 Posted : Sunday, November 13, 2016 6:50:59 AM(UTC)
Quote
drewster

Rank: Member

Groups: Registered
Joined: 11/1/2016(UTC)
Posts: 3

Well I did replace the motor. Job took about 2.5 hours that includes cleaning up. Works like a charm. Part cost me about $180.00 bucks. A big savings overall.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Kenmore Elite Dishwasher Problem (Dishwasher Repair)
by AndyH01 3/31/2022 3:33:31 AM(UTC)
No power to control panel Kenmore Elite dishwasher model 665.12793k311 (Garbage Disposer Repair)
by John Boof 2/2/2022 6:56:51 PM(UTC)
Kenmore Elite Dishwasher Tech Sheet needed (Dishwasher Repair)
by Recon2it 3/15/2019 3:06:42 PM(UTC)
Kenmore Elite dishwasher 665.13112K700 blows thermal fuse (Dishwasher Repair)
by rrsteven 10/31/2018 9:02:16 PM(UTC)
Kenmore Elite Dishwasher 665.16039403 Wash & Pump Problems (Dishwasher Repair)
by Maico18 7/24/2018 10:35:33 AM(UTC)
Kenmore Elite Dishwasher diverter installation (Dishwasher Repair)
by fasta6 11/13/2014 6:26:52 AM(UTC)
Kenmore elite dishwasher (Dishwasher Repair)
by lwarden 2/11/2014 8:31:48 AM(UTC)
Kenmore Elite Dishwasher wont start (Dishwasher Repair)
by jlewis2407 9/22/2013 3:54:19 PM(UTC)
Kenmore Elite Dishwasher - stuck - green light flashing (Dishwasher Repair)
by jfwilliams3 4/28/2013 7:52:01 PM(UTC)
Kenmore Elite Dishwasher blowing fuses (Dishwasher Repair)
by dennis728 2/26/2013 2:20:25 PM(UTC)
kenmore elite dishwasher (Dishwasher Repair)
by beaumart@plateautel.net 1/1/2013 2:40:43 PM(UTC)
Kenmore Elite Dishwasher Stopped Mid-Cycle (Washer Repair)
by regpum 11/13/2012 6:34:23 PM(UTC)
Kenmore Elite Dishwasher (Dishwasher Repair)
by rlarson 3/28/2012 11:31:27 PM(UTC)
Kenmore Elite Dishwasher (Dishwasher Repair)
by Moe147 3/7/2012 8:59:58 AM(UTC)
Kenmore Elite Dishwasher Won't Start (Dishwasher Repair)
by sstanley 2/18/2012 10:38:58 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.