Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
wfwood  
#1 Posted : Thursday, October 10, 2013 12:01:37 PM(UTC)
Quote
wfwood

Rank: Member

Groups: Registered
Joined: 9/11/2013(UTC)
Posts: 3

We use the dishwasher on Normal mode. When you push the Start button it starts fine. Light next to Start button lites with - - and Sensing light comes on, and you hear it filling. After about 6 minutes it the LED reads 84. You can hear the water running again, for 2 min. and LED reads 83. After another 2 minuintes, you can hear it filling again. After another 3 minutes, the LED reads 78 and the heating light comes on. After that nothing happens. No wash action. When you push Cancel, the water drains. If you open the door at this time a lot of steam comes out and the soap dispenser is open. The water temp going into the dishwasher is 124 degrees. Please help. Do I take the inside front door cover off to access the controls? And if I have to replace the thermistor, how do I get to it?


Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.