|
|||
![]() |
Register | FAQ's | New Posts | Today's Posts | Extras |
» Upper wash and rinse arm - Is a part missing? |
![]() ![]() |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
![]() Model Number: MDB7851AWS0 Brand: Maytag Age: 5 - 10 years
![]() I am troubleshooting why my wife's dishwasher because it does not clean and rinse very well. Among other things, I removed the upper wash and rinse arm assembly to clear out any clogs in the passageways and noticed that the vertical part of the rinse arm assembly has an opening on the left side. The area around the opening looks like there should be something attached (clipped) over this opening but there is not. The parts diagram does not seem to show if there should be a plug over this opening or not (see attached). Is this the way it should be or is a part missing? Further, if no plug or part is missing, what is the purpose of this opening? Is it an air inlet for the tube going to the pump? Thanks in advance for any info on this. Related Models Last edited by hkeiner : 08-31-2013 at 10:41 AM. |
![]() |
See inside of your appliance - diagrams and part photos for virtually every model.![]() powered by AppliancePartsPros.com |
|
|||
![]() That individual part doesn't look available even on the sears site also. Contact the manufacture see if they can help you. If not just order the new fill tube and it should have aftermarket changes if that hole isn't designed for your specific model type or should have cap.
|
![]() |
See inside of your appliance - diagrams and part photos for virtually every model.![]() powered by AppliancePartsPros.com |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Missing Rinse Kit and fill cap | joeteves@verizon.net | Dishwasher Repair | 1 | 06-29-2012 06:11 PM |
missing part | Blake1111 | Oven Repair (including Ranges and Cooktops) | 2 | 02-24-2010 03:24 AM |
Missing part?? | diyinch | Dishwasher Repair | 0 | 02-06-2010 08:09 AM |
Rinse aid sensor missing on part # 8558129 | gu1500 | Dishwasher Repair | 6 | 11-01-2009 07:44 AM |
Upper rack roller missing | Bob N | Dishwasher Repair | 1 | 06-11-2008 09:26 AM |