Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rgl04  
#1 Posted : Tuesday, April 23, 2013 7:24:00 AM(UTC)
Quote
rgl04

Rank: Member

Groups: Registered
Joined: 4/23/2013(UTC)
Posts: 1

The dishwasher starts, then a couple minutes into the cycle it stops. The Sensing, washing dhying and sanitizing lights start flashing. There is some standing water in the bottom. Once you clear the lights and try to start again I can hear water being drained, so I don't know if it is the drain pump. Any ideas
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
scott5495  
#2 Posted : Tuesday, April 23, 2013 3:33:28 PM(UTC)
Quote
scott5495

Rank: Member

Groups: Registered
Joined: 4/19/2013(UTC)
Posts: 188

sounds like the dishwasher is overfilling. the next time is stops, open the door and check water level. there is a float at the front left side of the dishwasher. push down on the float. if you hear a click then it has to much water and the valve needs to be replaced.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.