Dishwasher Repair

Don6868 · #1 (**permalink**) 03-19-2013, 04:52 PM

I have a Kitchen aid dishwasher that will not wash. Replaced the motor assembly, but still will not wash. Tub fills then float clicks. Motor relay kicks in on circuit board, but motor does not run. Checked thermal fuse and it is not open. Do not want to replace control board but do not know what to check/replace next.

Don

Gene · #2 (**permalink**) 03-20-2013, 03:23 PM

Hi Don,

Check for 120 VAC to the pump motor while it should wash. If the reading is incorrect, check all wires. If there is nothing wrong, replace the control board.

- The control board Part number: W10084141

Here are the breakdown diagrams and Parts for Whirlpool KUDI02IRBL0 Dishwasher - AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dryer motor repair	doverdsr	Dryer Repair	0	08-01-2012 06:10 PM
repair dishwasher motor	icandoitbymyself	Dishwasher Repair	0	03-25-2011 02:43 PM
Noisy Whirlpool Dishwasher: Replace just motor or whole pump&motor	mdion	Dishwasher Repair	7	02-28-2011 01:31 PM
Whirlpool dishwasher parts - replace motor or motor AND pump?	dishwasher hums	Dishwasher Repair	4	01-04-2011 04:57 AM
motor repair?	capt	Dishwasher Repair	6	02-02-2009 06:55 PM

Dishwasher motor repair

Dishwasher Repair

I have a Kitchen aid dishwasher that will not wash. Replaced the motor assembly, but still will not wash. Tub