[lr9147]

Have, not checked with level yet, going to see if my son has one before I purchase. Have a few questions to maybe help someone narrow my problem down, don't know if it is fully draining or not. Water is only standing around the flow valve (part number 22 from diagram) This may be normal, don't know. If water is only standing there at the front, does that indicate that dishwasher is not level? Also, the water is dripping on the floor from a plastic tie that i.s hanging down below tub level. Have not had a chance to t
try draining hose into bucket, but I will. The drain hose that is hooked up under the sink comes straight down to the cabinet floor and runs across cabinet floor to go into dishwasher, does that sound right, didn't know if it should be that low
This is a one woman DIY project and this dripping has been going on for awhile. I am not letting my floor get wet, I just put a towel under door until I can get it fixed. I do a lot of home projects but know nothing about dishwashers .lllllllllllllllllllllllllllllllllllllllllllllllll llllllllllllllllllllllllllllllllllllllllllllllllll llllllllllllllllllllllllllllllllllllllllllllllllll