Took apart my dishwasher and cleaned thoroughly. Thought I made progress but dishes continued to come out dirty. Most of the damage is on the glasses as pieces of residue don’t entirely get rinsed off and then dry on making almost impossible to get off. My problems being:
Not sure where the residue is coming from and
Why the dirt isn’t getting flushed out with the drain cycle
In the pictures on these sites:
www.********************...w.php?pic=fpa6au&s=6
www.********************...w.php?pic=1q1vgp&s=6

You can kinda see the dirt that’s not being drained out and is ending up on my dishes. These pictures were taken after I ran a CLEAN load. So there my dishwasher should have been spotless, instead it has pee’s, pieces of potato on the sides and tons of grime which I recognize on my glassware. I’m concerned it may be the pump and lack of water pressure but I can feel the force of the jets from the counter on top the dishwasher and the sounds indicate sufficient force. I took the plate off the bottom and none of the pipes or clogged. This dishwasher is only 4 years old and is a Kenmore Elite Ultra Wash, only problem has been in the last couple months and the only thing I’ve noticed is during the initial drain cycle it seems to make an odd sound. Not very loud or distinct but I haven’t recognized it before. Anything to offer would be greatly appreciated.