Dishwasher Repair

wapiwulo · #1 (**permalink**) 02-01-2013, 05:20 AM

After power failure alarm wont go off and key pad is out.cheked your forum and found a similar problem but there was no solution. please if someone has figuered it out by now HELP! Thanks in advance. George

Gene · #2 (**permalink**) 02-01-2013, 06:20 PM

Hi George,

The problem can be a bad turbidity sensor (#321 at the diagram) or a bad control board. There is a very small chance for the keypad to be bad as well.

You can check the turbidity sensor for continuity across the terminals 1 & 4. If there is no continuity then the sensor is bad. In such situation it's time for a new dishwasher because this part is no longer available.

If the sensor is good, replace the control board.

- The control board Part number: WD21X10187

- The key pad Part number: WD34X10908

Here are the breakdown diagrams and Parts for GE PDW9880J00SS Dishwasher - AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
alarm	ilirpapa	Oven Repair (including Ranges and Cooktops)	0	08-31-2011 04:54 PM
dishwaaher lower arm wont turn	pkbuddy	Dishwasher Repair	0	07-31-2010 10:03 AM
CE display and alarm	eyecue	Refrigerator & Freezer Repair	0	02-15-2010 06:32 PM
Oasis HE has LD Alarm	billsoto	Washer Repair	1	01-06-2010 12:20 PM
Alarm FC	hesper73	Oven Repair (including Ranges and Cooktops)	9	12-10-2008 06:39 PM

GE dishwaaher alarm

Dishwasher Repair

After power failure alarm wont go off and key pad is out.cheked your forum and found a similar problem but