Dishwasher Repair

weesel72 · #1 (**permalink**) 12-14-2012, 11:26 AM

The circulation pump has the proper voltage, no blockage, so i need to know how to ohm it and what the ohms should be before i call it bad and replace it.
Thank you!

denman · #2 (**permalink**) 12-15-2012, 04:16 AM

I do not have a spec on the winding resistance.

But if the motor rotates easily and does not run when it has 120 volts across it then it is toast.

weesel72 · #3 (**permalink**) 12-15-2012, 06:40 AM

Quote:

Originally Posted by denman

I do not have a spec on the winding resistance.

But if the motor rotates easily and does not run when it has 120 volts across it then it is toast.

That was my thought as well. Was just hoping to get the resistance spec to be 100% certain...that's one expensive part for a cheap dishwasher! Might be better off just getting a new one!
Thanks for your reply!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frigidaire Dishwasher	d50homer	Dishwasher Repair	0	12-05-2011 06:36 PM
frigidaire dishwasher	runner357	Dishwasher Repair	0	08-25-2011 07:45 PM
Frigidaire Dishwasher	not2psycho	Dishwasher Repair	1	03-02-2010 07:45 AM
frigidaire dishwasher won't run	utahskierdave	Dishwasher Repair	2	02-06-2009 07:34 PM
Frigidaire Dishwasher Won't Dry	edv822	Dishwasher Repair	1	11-23-2008 08:33 AM

Frigidaire dishwasher

Dishwasher Repair

The circulation pump has the proper voltage, no blockage, so i need to know how to ohm it and what