|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Kitchenaid no heat dry/sanirinse after replacing heater element and fuse |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
12-04-2012, 07:45 AM
|
|||
|
|||
Kitchenaid no heat dry/sanirinse after replacing heater element and fuse
Model Number: KUDS30IXWH4 Brand: Kitchen Aid Age: 1 - 5 years
Kitchen aid will not sanirinse or heat dry dishes. We replaced the heating element as well as the fuse.. water temperature coming in is hot enough...don't know where to go from this point. Any ideas? Dishwasher is a little over one year old
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| replacing a baking heater element | aanisgard | Oven Repair (including Ranges and Cooktops) | 1 | 06-18-2010 02:47 AM |
| KUDS01FLSS2 heater element replacement AP3841139 blew fuse | djm2 | Dishwasher Repair | 1 | 02-10-2010 09:50 PM |
| Testing, replacing GE heater element | jyhill | Refrigerator & Freezer Repair | 1 | 06-23-2009 08:31 PM |
| ge wsm2700wawww replacing heater element | bobatjsk | Dryer Repair | 1 | 12-28-2007 05:12 PM |
| replacing heater element | Roy T | Dryer Repair | 1 | 11-11-2007 07:59 AM |
Linear Mode
