|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Dishwasher will not power up |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-20-2012, 08:44 AM
|
|||
|
|||
Dishwasher will not power up
Model Number: FDB1050REC0 Brand: Electrolux Age: 1 - 5 years
I have a Frididare Electrolux dishwasher that is about 3-4 years old. It is not powering up. I do have power to the door switch and from the door switch to the mother board. I ordered a replacement mother board and removed it from its plastic housing to put it in and it still will not power up. I think I have a defective replacement mother board. Does any one have any suggestions? Did I miss something while installing the unit? The unit is level under the counter. HELP!!!
 Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
11-20-2012, 10:48 AM
|
||||
|
||||
Hi.
You need to make sure that you are getting 120VAC to the control board between hot and neutral. If you are positive that it's there - try another control board Part number: 154712101 Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
11-20-2012, 02:19 PM
|
|||
|
|||
|
I put my tester to the white and black weir and the tester does not light up. If I touch the black weir and something metal the tester lights up. Is that the issue?
|
|
11-20-2012, 02:41 PM
|
||||
|
||||
|
You are not getting 120VAC. You are getting only hot side. Check the door switches, junction box connections (behind the toe panel on the right).
Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
11-20-2012, 04:00 PM
|
|||
|
|||
|
I got it. I found that the neutral weir was not connected in the junction box in the basement for some reason. It is now working. Thank you for your help.
|
|
11-21-2012, 10:05 AM
|
||||
|
||||
|
You are welcome.
Simon.
__________________
Find Appliance Parts at AppliancePartsPros.com - Largest inventory in the U.S. with 91% of all in-stock orders delivered within 2 business days. Thousands of photos and diagrams make it very easy to find the right part. Enter your appliance model here.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GE Dishwasher won't power up! | hargisr | Dishwasher Repair | 0 | 04-24-2012 05:46 AM |
| Fridigaire dishwasher no power to the dishwasher and water will not drain out | jarhead1984 | Dishwasher Repair | 0 | 02-27-2012 07:43 AM |
| GE Dishwasher with No Power | Katie1011 | Dishwasher Repair | 1 | 01-15-2012 10:56 AM |
| Dishwasher no power | kuki19 | Dishwasher Repair | 3 | 01-04-2009 07:30 PM |
| dishwasher no power | martyconfused | Dishwasher Repair | 1 | 02-06-2008 03:27 PM |
Linear Mode
