Dishwasher Repair

royandila · #1 (**permalink**) 11-14-2012, 02:28 PM

dishwasher will not fill with water. should there be continuity between the two
terminals on the solenoid? If so how much.

Gene · #2 (**permalink**) 11-15-2012, 04:07 PM

Quote:

Originally Posted by royandila

...should there be continuity between the two
terminals on the solenoid?...

Any reasonable reading is good but it does not mean that the water valve itself is good. It has a screen inside which can be blocked with hard water deposits. Check for 120 VAC to the water inlet valve while the control calls for water. If the voltage is correct, replace the water inlet valve.

- The water inlet valve Part number: WD15X10003

Here are the breakdown diagrams and Parts for GE GSD6200G00WW Dishwasher - AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fridigaire dishwasher no power to the dishwasher and water will not drain out	jarhead1984	Dishwasher Repair	0	02-27-2012 07:43 AM
Dishwasher control lights out and dishwasher stopped working	hatchchuck	Dishwasher Repair	1	12-26-2010 04:48 AM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:17 PM
Dishwasher will not empty no lights on front of dishwasher except led lines	badtothebone	Dishwasher Repair	0	05-13-2010 02:14 PM
dishwasher spray arm melted to heating element and now dishwasher not working	msphillips2	Dishwasher Repair	0	05-08-2010 10:21 AM

dishwasher

Dishwasher Repair

dishwasher will not fill with water. should there be continuity between the two terminals on the solenoid? If so how