Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
mcurtis  
#1 Posted : Wednesday, October 31, 2012 11:34:08 AM(UTC)
Quote
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4

DW is 2 years old. Options buttons work, but cycle buttons won't, and DW won't start. I'm able to run it through the diagnostic cycle by pressing high temp / heat / hight temp /heat. I'm guessing it's the controller, but would like to test the front panel buttons before ordering a control panel. Where can I find the pin out for the ribbon cable which connects the front panel to the control Panel?

Thanks
Maynard
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Wednesday, October 31, 2012 12:01:07 PM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

You should find the tech sheet inside the door or behind the toe panel.
Based on your description it's the control panel.

Here are the parts breakdown and 02-Control Panel Parts parts for Maytag MDBH979AWS3 - AppliancePartsPros.com

Post the results.

Simon.
mcurtis  
#3 Posted : Wednesday, October 31, 2012 12:20:30 PM(UTC)
Quote
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4

I looked under the toe panel and took off the front panel of the dishwasher, but couldn't find a tech sheet. I'll go ahead and try the control panel.

Thanks
Maynard
mcurtis  
#4 Posted : Wednesday, October 31, 2012 12:34:11 PM(UTC)
Quote
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4

By "control panel" , I assume you mean the controller (they call "Cntrl-Elec" ) and not the front panel (which they call the "Panel Cntrl")

Maynard
Simon / APP Team  
#5 Posted : Wednesday, October 31, 2012 3:08:31 PM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

By "control panel" I meant the "Panel Cntrl".

Simon.
mcurtis  
#6 Posted : Wednesday, November 14, 2012 9:34:50 AM(UTC)
Quote
mcurtis

Rank: Member

Groups: Registered
Joined: 10/31/2012(UTC)
Posts: 4

It was the Panel Cntrl. Thanks for you help and great service.

Maynard
Simon / APP Team  
#7 Posted : Wednesday, November 14, 2012 11:01:01 AM(UTC)
Quote
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

You are welcome.

Simon.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
maytag won't start, new control board (Dishwasher Repair)
by notbob 9/25/2012 6:08:20 PM(UTC)
Maytag won't start (Dishwasher Repair)
by rroth 6/22/2010 5:32:40 PM(UTC)
maytag won't start (Dryer Repair)
by suff1778 2/9/2010 9:02:21 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.