[repair monkey]

Dishwasher purchased used for my son's house. Hooked up the drain, water, electricity. Closed & locked door then started cycle. Motor would work through all cycles except the water would not fill. Checked to make sure water supply had water at the fill valve. Check solenoid of fill valve to make sure it was working (ran leads from 110 VAC jumper to solenoid) and it was indeed working. Checked voltage coming to the solenoid within the internal wiring. Voltage supply was registering in a low milli-volt range. I think the problem is with the supply voltage to the solenoid. Shouldn't it be registering in the 110 VAC range?