Rank: Member
Groups: Registered
Joined: 8/22/2012(UTC)
Posts: 2
|
No lights on at all unless i press hi temp them heated dry then normal wash and start. It will start quick rinse then normal wash will start soap door opens goes back to quick rinse then back to normal then off all in about 2-3 mins. I have turned breaker off and left off for 10mins, also undid ribbon and turned on motor started put all back toghter and still same thing any ideas please!!:confused:
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi. Based on what you are describing most likely it's the control panel. Part number is Part number: W10137549
Thank you. post the results. Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/22/2012(UTC)
Posts: 2
|
Originally Posted by: Simon / APP Team  Hi. Based on what you are describing most likely it's the control panel. Part number is Part number: W10137549
Thank you. post the results. Simon. Thanks for a fast response. Is there any test or anything I can do to test the control panel to ensure thats it?
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
Remove the toe panel and locate the tech sheet. Hopefully it will have the touch pad test. Also, you can pull out from the control board plug the flex ribbon connector and clean the edge with isopropyl alcohol and /or pencil eraser.
Simon.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
