Dishwasher Repair

j.tuttle · #1 (**permalink**) 09-21-2009, 01:09 PM

I Have A Rolling Frigidaire Dishwasher That You Connect To The Faucet On The Sink. Its Not That Old. Im Not Getting Any Water. I Already Replaced The Water Inlet Valve And Still Not Working. Am I Missing Something Else That I Cant Think Of? Please Help.

glen65 · #2 (**permalink**) 09-21-2009, 01:22 PM

The first thing to check is the float it may be stuck.
See # 25 in pic below. It should move freely up and down.
When you raise it by hand the float should drop down when
you release it.

j.tuttle · #3 (**permalink**) 09-21-2009, 01:31 PM

I Have Checked To See If The Float Or Switch Were Sticking, But They Are Both Good. I Even Check For Cont. On The Switch And It Is Good.

glen65 · #4 (**permalink**) 09-21-2009, 01:40 PM

The next thing to do would be to pull the plug off of the
fill valve then insert the probes on your meter so that
they make connection to the terminals. Set your meter
to measure AC voltage then start it on a cycle. At some point
for a brief period after you start it you should get 120 volts AC. Do you?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replaced water inlet valve, still not working	imhotep	Dishwasher Repair	5	04-05-2013 07:56 AM
Water inlet valve	MPKNAPLES	Dishwasher Repair	0	09-08-2009 12:26 PM
Replaced Water Inlet Valve Kit	EdP	Refrigerator & Freezer Repair	7	05-29-2009 09:22 AM
Washer wont fill, replaced inlet valve	cadarc	Washer Repair	6	04-20-2009 02:55 PM
Water Inlet Valve	chefinthecity	Refrigerator & Freezer Repair	1	12-08-2008 11:41 AM

not getting water,already replaced inlet valve

Dishwasher Repair

I Have A Rolling Frigidaire Dishwasher That You Connect To The Faucet On The Sink. Its Not That Old. Im