Dishwasher Repair

ctstein · #1 (**permalink**) 07-09-2012, 02:23 PM

The dishwasher was working fine.
I hadn't used it in awhile and now I close the door and press the button.
No lights, No Power.

We did the reset. Turned breaker off for a day. It did not fix it.
We tested the fuse. That is fine. Power going in and out, at least 125 volts
Tested the door switch. That is fine. Power going in and out, at least 125 volts

There is power going into the circuit board. It doesn't come out.

What else should we test?

Thanks,
Alex

Gene · #2 (**permalink**) 07-10-2012, 01:51 PM

Hi Alex,

The model number you posted is incomplete. Verify and repost it please.

Gene.

ctstein · #3 (**permalink**) 07-10-2012, 01:58 PM

Model KUDS03CTSS3

Gene · #4 (**permalink**) 07-10-2012, 04:11 PM

Most likely the problem is a bad control board.

Perform the "Checking keypad operation" test as described in the attached Tech sheet. Post the results.

Here are the breakdown diagrams and Replacement parts for Whirlpool KUDS03CTSS3 UNDERCOUNTER DISHWASHER | AppliancePartsPros.com

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fridigaire dishwasher no power to the dishwasher and water will not drain out	jarhead1984	Dishwasher Repair	0	02-27-2012 07:43 AM
Dishwasher would not power up	samardas	Dishwasher Repair	0	07-31-2011 10:48 AM
Dishwasher Has No Power AGAIN!!	shoncavett	Dishwasher Repair	0	03-13-2009 11:05 AM
dishwasher no power	martyconfused	Dishwasher Repair	1	02-06-2008 03:27 PM

Dishwasher Has No Power

Dishwasher Repair

The dishwasher was working fine. I hadn't used it in awhile and now I close the door and press the