|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » should I replace the motor or impeller? |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
03-19-2012, 10:37 AM
|
|||
|
|||
should I replace the motor or impeller?
Model Number: GLD4560N10SS Brand: GE Age: 1 - 5 years
I have a GE GLD4560N10SS that is not running through the cycles. It will start filling with water but doesn't go through the wash cycles. I know that it is an issue somewhere in the motor as I can remove the footplate and turn the fan and it it will run normally for a few days but if I go a day without running it the problem arises again so I have to turn the fan again. is it just the seal or do I need to replace the motor?
Ads By Google Related Models 
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Motor shaft too large for new impeller | Mike Green | Dishwasher Repair | 0 | 07-23-2011 12:05 PM |
| Chopper impeller worn- need motor?? | PAJohn | Dishwasher Repair | 3 | 03-12-2011 03:25 PM |
| How do I remove motor and impeller | leroy.litzhoff@gmail.com | Dishwasher Repair | 0 | 10-22-2010 05:22 PM |
| How do I remover motor/pump/impeller | wmako | Dishwasher Repair | 4 | 02-13-2010 06:11 AM |
| Frigidaire - Motor shaft - to - Impeller | Major01 | Dishwasher Repair | 7 | 10-26-2009 08:27 AM |
Linear Mode
