Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
mwill5  
#1 Posted : Monday, July 27, 2009 5:09:18 AM(UTC)
Quote
mwill5

Rank: Member

Groups: Registered
Joined: 12/12/2008(UTC)
Posts: 15

I have a kitchen aid dishwasher that we have replaced the thermal fuse, twice. When the first one went bad,was during a storm. I replaced it and the dishwasher worked for about two weeks, It went out last week, I put a new fuse in and it didnt last over the weekend. I have checked amp draws on the heating elemnt and cant seem to find anything out of range. Has any one ran across this before?

Thanks
Mitch
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, July 27, 2009 5:22:17 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Mitch,

What is the complete model number of the dishwasher?

What is the part number of the thermal fuse you installed?

Gene.
mwill5  
#3 Posted : Tuesday, July 28, 2009 5:47:29 AM(UTC)
Quote
mwill5

Rank: Member

Groups: Registered
Joined: 12/12/2008(UTC)
Posts: 15

KuDS01FLSS6

Part# 8269213
Gene  
#4 Posted : Tuesday, July 28, 2009 7:21:07 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Have you replaced the wires supplied with the new part?

UserPostedImage

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL KUDS01FLSS6 | AppliancePartsPros.com

Gene.
mwill5  
#5 Posted : Wednesday, July 29, 2009 5:06:13 AM(UTC)
Quote
mwill5

Rank: Member

Groups: Registered
Joined: 12/12/2008(UTC)
Posts: 15

No, Just the fuse itself. The terminals looked ok. I will replace the wires when we go back out with a new fuse.

Mitch
mwill5  
#6 Posted : Wednesday, July 29, 2009 5:10:27 AM(UTC)
Quote
mwill5

Rank: Member

Groups: Registered
Joined: 12/12/2008(UTC)
Posts: 15

I read in a previous post to replace the wiring when the fuse is replaced. Is there a problem with overcurrent or amperage there? We dont work on many kitchen aid dishwashers, so im not real familiar with some of there problems.

Mitch
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
No Water Fill…KitchenAid Dishwasher KUDS03FSSS3 (Dishwasher Repair)
by irvingtelder 11/22/2023 7:02:56 AM(UTC)
Kitchenaid dishwasher pump? (Dishwasher Repair)
by Guest 6/11/2023 10:15:41 AM(UTC)
KUDS02FRSS2 Kitchenaid dishwasher (Dishwasher Repair)
by RepairDude61 7/2/2022 3:45:51 PM(UTC)
KitchenAid Dishwasher Not drying (Dishwasher Repair)
by louie@DFW 4/8/2022 5:15:51 PM(UTC)
Kitchenaid Dishwasher Multiple Errors (Dishwasher Repair)
by flamingvan@yahoo.com 12/6/2021 3:49:43 AM(UTC)
Kitchenaid Dishwasher F9E4 (Dishwasher Repair)
by louisd 10/17/2021 4:22:16 PM(UTC)
Kitchenaid Dishwasher diverter motor replacement (Dishwasher Repair)
by kitchdish 5/28/2021 12:32:35 PM(UTC)
KitchenAid Dishwasher Issue (Dishwasher Repair)
by facecard 3/19/2021 6:20:02 AM(UTC)
KitchenAid Dishwasher KUDS30IXBL Thermal Fuse (Dishwasher Repair)
by Ed Explains It 3/16/2021 10:34:44 AM(UTC)
KitchenAid Dishwasher will not complete cleaning Cycle (Dishwasher Repair)
by KyKatt 12/16/2020 12:23:50 PM(UTC)
KitchenAid Dishwasher no water (Dishwasher Repair)
by tjlester 9/25/2020 10:51:39 AM(UTC)
KitchenAid dishwasher filling up when turned off (Dishwasher Repair)
by RinOakland 9/14/2020 8:50:00 AM(UTC)
KitchenAid Dishwasher pops open(latch changed) (Dishwasher Repair)
by saads 8/8/2020 9:51:27 PM(UTC)
Kitchenaid Dishwasher Not Starting (Dishwasher Repair)
by willmt10 6/28/2020 4:22:06 PM(UTC)
(Help) KitchenAid Dishwasher wont fully drain on normal cycle (Dishwasher Repair)
by ToNeG24 5/28/2020 9:16:06 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.