Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
sstanley  
#1 Posted : Saturday, February 18, 2012 10:38:58 PM(UTC)
Quote
sstanley

Rank: Member

Groups: Registered
Joined: 2/18/2012(UTC)
Posts: 1

I have a Kenmore Elite Dishwasher, model #665.16983201. One day, it would not start, and one of the lights was blinking (I can't remember which one). Then all of the sudden, it started to work again - once. Then it completely stopped - no lights would turn on when the buttons were pushed.

I read how to reset the dishwasher, so with the door open, I hit: Hi temp scrub - air dry - Hi temp scrub - air dry. All of the lights turned on at the same time. I closed the door, hit cancel, and the dishwasher ran through some sort of cycle for a few minutes. When it was done, I tried running it - this time the lights would turn on when I pushed the buttons, but the dishwasher still won't start.

Can you help me diagnose this? thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ApplianceJunk  
#2 Posted : Sunday, February 19, 2012 7:43:03 AM(UTC)
Quote
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277

Hi,

I would remove the access panel below the door.
Look for and read the tech sheet. Then run the dishwasher through the diagnostic cycle to test it.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Kenmore Elite dishwasher won't start (Dishwasher Repair)
by canman 2/6/2008 8:44:15 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.