Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
tallerpaul007  
#1 Posted : Saturday, February 18, 2012 2:50:13 AM(UTC)
Quote
tallerpaul007

Rank: Member

Groups: Registered
Joined: 2/17/2012(UTC)
Posts: 1

Hello friends
Serial No SGS45E68GB/64
I have no water going in my dishwasher however as I am an engineer I put a multimeter on the inlet valve coil I found no power to the coil.
I then checked to see if it had any power pos or neg I found it had 220 volts live phase to coil but no negative.
I traced wiring up to the controller on the front of the dishwasher but seems it lost its negative from the controller.
As I have no electric schematic or trouble shooting manual is there anything that can cause the controller to lose its negative.
Or can someone help to supply me the manuals or schematic
Thank you for any help.
Paul
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
tlundberg  
#2 Posted : Tuesday, February 21, 2012 11:29:44 AM(UTC)
Quote
tlundberg

Rank: Member

Groups: Registered
Joined: 2/21/2012(UTC)
Posts: 1

Originally Posted by: tallerpaul007 Go to Quoted Post
Hello friends
Serial No SGS45E68GB/64
I have no water going in my dishwasher however as I am an engineer I put a multimeter on the inlet valve coil I found no power to the coil.
I then checked to see if it had any power pos or neg I found it had 220 volts live phase to coil but no negative.
I traced wiring up to the controller on the front of the dishwasher but seems it lost its negative from the controller.
As I have no electric schematic or trouble shooting manual is there anything that can cause the controller to lose its negative.
Or can someone help to supply me the manuals or schematic
Thank you for any help.
Paul


Someone posted a troubleshooting guide for Bosch on the first forum listed titled "dishwasher". It includes electrical schematics
Gene  
#3 Posted : Tuesday, February 21, 2012 1:44:11 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Paul,

Looks like this is the UK model. Unfortunately we do not have any tech information for non American models. I can only guess that the problem is a bad control module.

Gene.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.