Dishwasher Repair

carieira · #1 (**permalink**) 07-12-2009, 08:22 PM

The handle was loose, I opened the panel on the back, fixed the handle.

But now having a hard time putting the door back. The springs are very strong and can't open them and at the same time slide the door in.

Suggestions?

Gene · #2 (**permalink**) 07-13-2009, 05:12 PM

I would try to have someone to help holding the door.

Gene.

carieira · #3 (**permalink**) 07-13-2009, 07:14 PM

Thanks Gene. I did that and it worked.

What Bosh could let us know is that when the door handle is loose we shouldn't unscrew all the screws on the inside part of the door. It this is done the springs get loose and your are in a very DIRE situation.

Unscrew only a few screws and the outside part of the door will be off and then you can work on the loose handle.

Gene · #4 (**permalink**) 07-14-2009, 05:01 PM

You are welcome. I'm glad to hear you are back in business.

Gene.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Putting the oven door back in place	Doran	Oven Repair (including Ranges and Cooktops)	0	12-26-2009 08:47 AM
door gaskets are glued (not screwed in place)	rodchrysler	Refrigerator & Freezer Repair	0	09-11-2009 09:11 AM
How to install/place the door handle latch.	Bob P.	Dishwasher Repair	0	08-29-2009 11:43 AM
replacing bottom freezer door gasket how is gasket held in place on this model	MrNigel	Refrigerator & Freezer Repair	0	07-21-2009 05:10 PM
pesky Thermador range door won't lock in place	ajappliance	Oven Repair (including Ranges and Cooktops)	0	10-15-2007 10:54 AM

Dishwasher place door back in place

Dishwasher Repair

The handle was loose, I opened the panel on the back, fixed the handle. But now having a hard time