|
|||
 |
|||
| Register | FAQ's | New Posts | Today's Posts | Extras |
| » Magic Chef Dishwasher/Door Springs |
 |
By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use. |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
06-27-2009, 07:57 AM
|
|||
|
|||
Magic Chef Dishwasher/Door Springs
Model Number: DU96CK-01 Brand: Magic Chef Age: More than 10 years
One of the Door Cables broke and the door just flops down now. I removed the lower panel and looked inside. One of the Springs (part# 44) was still hooked onto the broken, flat end of the Cable (Part #8) but neither Spring was attached to anything else. When the one Cable broke did it release the other Spring and Cable off the side of the door?
My question is: If I order a new set of cables does one end of the Cable attach to both Springs and then does it loop around the white plastic roller before attaching to the lower end of the door? Or does it just go around the white plastic roller? Do I repete the same for the other end of the Springs? Or are the Springs attached independently of eachother to the Frame somewhere? Should I replace the Springs as well at this time? ezraappel@gmail.com Related Models Last edited by eappel : 07-01-2009 at 12:54 PM.     
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
07-01-2009, 12:58 PM
|
|||
|
|||
 [quote=eappel;101523]One of the Door Cables broke and the door just flops down now. I removed the lower panel and looked inside. One of the Springs (part# 44) was still hooked onto the broken, flat end of the Cable (Part #8) but neither Spring was attached to anything else. When the one Cable broke did it release the other Spring and Cable off the side of the door? My question is: If I order a new set of cables does one end of the Cable attach to both Springs and then does it loop around the white plastic roller before attaching to the lower end of the door? Or does it just go around the white plastic roller? Do I repete the same for the other end of the Springs? Or are the Springs attached independently of eachother to the Frame somewhere? Should I replace the Springs as well at this time? Last edited by eappel : 07-01-2009 at 01:01 PM.
|
|
07-01-2009, 08:06 PM
|
||||
|
||||
|
Looking at the diagram
 you can see the cable (#8) connected to both springs (#44) and the other end of the cable goes around the roller. This end of the cable then should be connected to the door hinge (plugs into the round slot). If the springs are not broken then you do not have to replace them. Here are the breakdown diagrams and Replacement parts for MAGIC CHEF DU96CK-01 | AppliancePartsPros.com Gene.
__________________
Professional appliance repair in Orange County, California.
|
|
|
See inside of your appliance - diagrams and part photos for virtually every model.
powered by AppliancePartsPros.com |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Magic Chef Dishwasher not draining | haljr5 | Dishwasher Repair | 1 | 12-12-2009 03:56 AM |
| Magic Chef Dishwasher | Beckyt55 | Dishwasher Repair | 1 | 01-09-2009 09:18 PM |
| magic chef door assembly | Tom Maytag | Oven Repair (including Ranges and Cooktops) | 1 | 01-02-2009 01:52 PM |
| Glass for Magic Chef oven door | namgb | Oven Repair (including Ranges and Cooktops) | 0 | 07-11-2008 11:34 AM |
| How to repair Magic Chef RV Range Door? | robob69 | Oven Repair (including Ranges and Cooktops) | 0 | 02-16-2008 07:27 AM |
Linear Mode
