Dishwasher Repair

nickynuc · #1 (**permalink**) 05-14-2009, 01:14 PM

Child lock will not disengage. How do I troubleshoot if its the sensor pad or contol panel?

denman · #2 (**permalink**) 05-15-2009, 06:00 AM

Have you tried removing power from the unit for an hour or so, to see if it will reset?

I have tried to find a pinout for the keypad for you but so far have not had any success. You really need that so the keypad can be checked with a meter to confirm that you have a stuck key.

Here is a tech sheet which may be of some use.
https://www.servicematters.com/docs/...%208051291.pdf

nickynuc · #3 (**permalink**) 05-15-2009, 04:07 PM

Disconnected power for one hour, the unit started up and i ran a load. It got about 2/3 done and the unit went off. I tried restarting and the child lock engaged. I pushed cancel and after about 2 minutes the washer started to discharge water.

I disconnected power again to reset it and the dishwasher started to work. Do you think moisture is getting into the keypad/circuit board?

denman · #4 (**permalink**) 05-15-2009, 06:27 PM

Would be worth opening it up and taking a look.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KitchenAid Child Lock will not reset	rdaughtrey	Dishwasher Repair	2	01-23-2013 02:48 AM
Child Saftey Lock	NCS	Dishwasher Repair	1	12-10-2009 05:09 PM
Child Lock Will not Release	Lou D	Dishwasher Repair	4	10-25-2009 07:28 PM

Child lock won't disengage

Dishwasher Repair

Child lock will not disengage. How do I troubleshoot if its the sensor pad or contol panel? Ads By Google