Discuss

kitchen aid washer not starting

 in

Dishwasher Repair

. "

model kuds01Ijbs sirs, my kitchen aid dishwasher stop working last week and had an electronic burnout smell. replaced the concerned

..."
 
 
Register | FAQ's | New Posts | Today's Posts | Extras
Appliance Repair Forum > Appliance Repair Help > Dishwasher Repair » kitchen aid washer not starting

Post New Thread  Reply By reading any content on this site you agree to AppliancePartsPros.com, Inc. disclaimer and Terms of Use.
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 07-22-2011, 07:06 AM
Junior Member
 
Join Date: Jul 2011
Posts: 5
paulclark is on a distinguished road
Default kitchen aid washer not starting
Brand: Kitchen Aid   Age: 5 - 10 years   

Appliance Parts from AppliancePartPros.com


model kuds01Ijbs
sirs,
my kitchen aid dishwasher stop working last week and had an electronic burnout smell. replaced the concerned burnout area(fuse) still burned out at new fuse. called and ordered your electronic control assemble part # please confirm correct one AP3775964 with another new fuse. Withdrew previous assemble with your new replacement with fuse. Started up, worked for one cycle, then did not drain. Now does not come on despite making contact with all buttons, however does have power as lights up "2" then "1" as in minutes. Thinking it may be the door catch huh?is this a critical area to to function?
I opened up area upon drainage, minor debris, tried again, now action. also get three lines --- upon panel. please advise, my wife is calling me elcheapo, but rpr. man wants 85.00 to show, plus labor rate and iflated parts. Would appreciate a rapid response on this matter.
paul clark

Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
  #2 (permalink)  
Old 07-22-2011, 07:10 AM
Junior Member
 
Join Date: Jul 2011
Posts: 5
paulclark is on a distinguished road
Default wont start

by the way, the new ordered replacement part that i received from you was somewhat different. upon one of the interior plugs, one now goes perpendicular to the other 5 prong plug. The initial with the unit had both horizontal, now one is vertical and the other is horizontal, Other entries do lightup, but do not funchtion, always displays "clean" but no function. please sdvise
part number AP3775964
model washer kuds01Ijbs

paul clark

Last edited by paulclark : 07-25-2011 at 06:33 AM.
Reply With Quote
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
washer not starting AMY101 Washer Repair 3 09-14-2010 07:00 AM
Washer control not starting washer KUDS Dishwasher Repair 0 01-18-2010 11:46 AM
dryer not starting - light come on not starting mike31 Dryer Repair 1 01-11-2010 07:50 PM
Frigidaire Frontload washer stops immediately after starting bethie28 Washer Repair 2 11-27-2009 04:48 PM
Washer Noise When Starting Spin jeankie Washer Repair 1 05-26-2009 06:23 PM



All times are GMT -7. The time now is 02:43 AM.

The content on this web site is for informational purposes only and is not intended to replace an on-site diagnosis from a qualified appliance service technician. By reading any content on this site you agree to AppliancePartsPros.com , Inc. disclaimer and Terms of Use.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17